Rock and Soil Mechanics ›› 2024, Vol. 45 ›› Issue (1): 108-116.doi: 10.16285/j.rsm.2023.5059

Previous Articles     Next Articles

Discussion on permeability characteristics of lime and fly ash solidified petroleum-contaminated soil and its engineering reuse

LI Min1, 2, LI Hui1, YU He-miao1, ZHAO Bo-hua1, QI Zhen-xiao1   

  1. 1. School of Civil and Transportation Engineering, Hebei University of Technology, Tianjin 300401, China; 2. Hebei Innovation Center of Civil Engineering Technology, Hebei University of Technology, Tianjin 300401, China
  • Online:2024-01-17 Published:2024-03-21
  • About author: LI Min, female, born in 1985, PhD, Professor, research interests: disposal of contaminated soils. E-mail: limin0409@hebut.edu.cn
  • Supported by:
    the National Natural Science Foundation of China (52278341, 51978235) and the Natural Science Foundation of Hebei (E2023202087, E2018202274).

Abstract:

The permeability of treated contaminated soil is an important factor to consider when reusing polluted soil in engineering projects. In this study, lime and fly ash were chosen as solidification materials due to their ability to both adsorb and solidify contaminants. The permeability coefficients of petroleum-contaminated soil before and after solidification, as well as the residual petroleum content within the soil, was investigated under varying parameters such as confining pressure, osmotic pressure and contamination intensity. X-ray diffraction and scanning electron microscopy were used to analyze the evolution of permeability and the migration and diffusion patterns of pollutants, providing insights into the engineering reutilization potential of solidified petroleum-contaminated soil. The results showed that the adsorption effect of the solidified product on petroleum molecules weakened the hydrophobicity of the petroleum, increasing the effective permeation pathways in the soil. The permeability coefficient of solidified petroleum-contaminated soil was two orders of magnitude higher compared to unsolidified soil. Both solidified and unsolidified petroleum-contaminated soil exhibited decreased permeability due to the enhanced adsorption and interception capacity of the soil matrix for petroleum, as well as the elevated confining pressure, osmotic pressure, and contamination level, which intensified the interception among soil particles. The solidification process effectively controlled the migration and diffusion of petroleum contaminants under permeation conditions. The residual petroleum content in various locations closely approximated the initial content, reducing the risk of pollution through permeation. Considering the mechanical properties (compressive strength of 1 280.1 kPa, shear strength of 388.88 kPa), permeability (ranging from 4.28×10−6 cm/s to 7.39×10−6 cm/s), and migration control characteristics (fluctuation rate from 0.3% to 4.9%) of lime and fly ash, it can be concluded that lime and fly ash solidified petroleum-contaminated soil can be reused in the construction of subgrade materials that require impermeability.

Key words: petroleum-contaminated soil, solidification and stabilization, engineering reutilization, permeability, lime, fly ash